Paint walls and ceiling of one car garage, including wood trim. Walls and ceiling to be done in latex flat paint, and wood trim to be done in latex semi-gloss paint, same color as walls and ceiling - most likely white. In addition, after walls, ceiling and wood trim are done, I would like the painter to apply a Valspar Garage Floor Coating Kit plus a Valspar Premium Clear Coating. The Garage Floor Coating Kit is an epoxy based paint, and includes a Fast Prep concrete cleaner solution, a Part A base paint and a Part B hardener for the base paint, and colored flakes to be applied to the epoxy coating. Thus the Garage Floor Coating Kit is applied in several steps - (1) application of floor prep solution, (2) washing of floor with water to remove residual floor prep solution, (3) removal of any remaining water and let dry overnight, (4) mix of epoxy base with hardener and prompt application of mixture followed promptly by application of flakes before epoxy hardens. After the Garage Floor Coating is cured for at least 24 hours (but not more than 5 days) then the epoxy Premium Clear Coating is applied. The Clear Coating includes a Part A base clear coating, a Part B hardener and a powder anti-skid material. These are all mixed together, and promptly applied over the Garage Floor Coating previously applied.